VOOPOO MOJO 80W MOD AND UFORCE SUB-OHM TANK TC STARTER KIT

Quantities available for this product:

  • BLACK : 0
  • GRAY : 0
  • WHITE : 4
  • RED : 0
  • ORANGE : 10
  • YELLOW : 9
  • BLUE : 0

Description



VooPoo MOJO with UFORCE Sub-Ohm Tank Starter Kit


The VooPoo MOJO Kit features a sleek minimalist design that provides a balance between power and portability. Powered by the new GENE.Fan chip, the MOJO supports temperature control modes for Nickel 200, Titanium, and Stainless Steel 316 wire. The new GENE.Fan chip allows the MOJO to have an instant firing speed of approximately 0.01 seconds when pressing the fire button. The MOJO can fire up to 80 watts and features a built-in 2600mAh battery that may be charged via the front micro USB charging port. The MOJO features silver round adjustment buttons and a black center fire button that feels comfortable to hold and use.

The VooPoo UFORCE features a sleek 304 stainless steel construction and can hold up to 3.5ml of e-liquid. The UFORCE may be conveniently filled from the top using the retractable top fill design. The UFORCE features triple airflow slots that may be adjusted using the bottom airflow control valve for maximum vapor production. The UFORCE utilizes UFORCE OCC atomizer heads designed for wattage mode. This kit includes (2) UFORCE U2 dual core 0.4ohm atomizer heads which are designed for a balance of flavor and vapor production.

Quick Links:
Replacement Atomizer Heads

Features and Specs for VooPoo MOJO Mod:

Powered by the GENE.Fan Chip
Dimensions: 3-3/16" x 1-3/8" x 15/16" (Without Tank)
510 Threaded
Built-in 2600mAh Battery
Wattage Range: 5.0 - 88.0W
Output Voltage: 0.0 - 8.5V
Variable Temperature Control : Nickel 200 / Titanium / Stainless Steel / TCR
Temperature Control Range: 200 - 600F / 100 - 315C
Resistance Range: 0.05 - 1.5ohm for Temperature Control Mode
Resistance Range: 0.05 - 3.0ohm for Variable Wattage
Instant Fire Speed: 0.01s
Minimalist Design
Zinc Alloy Construction
Ergonomic Design
Bottom Reset Button
0.96" OLED Display Screen
Front Micro USB Charging Port
Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for VooPoo UFORCE Tank:

Dimensions: 2-1/8"x 15/16" (Including Drip Tip and Threads)
Diameter: 24.6mm
510 Threaded
3.5ml E-Liquid Capacity
Retractable Top Fill Design
304 Stainless Steel Construction
Glass Tank
Quick Vent Channel
Triple Airflow Slots
Bottom Adjustable Airflow Control Valve
Utilizes UFORCE OCC Atomizer Heads for Wattage Mode
Includes (2) UFORCE U2 Dual Core 0.4ohm Atomizer Head (Designed for 40 - 80W)
Widebore Delrin Drip Tip with Inner V-Shape Design
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard/high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. 

For standard/high resistance atomizers or restrictive devices (ex. pod based/pen), we recommend recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer/tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. 

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in/on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board (PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion an/or fire. 

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears/rips in the battery wrap. Discontinue use immediately if battery is damaged. 

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

kanvape.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them proper.



Related Items