KANGERTECH T3'D T3D CLEAROMIZER ATOMIZER TANK

Quantities available for this product:

  • YELLOW : 21
  • PURPLE : 8
  • BLACK : 6
Description
 
Kanger T3'D Dual Coil
eGO Bottom Coil Clearomizer


  • Bottom Coil
  • Dual Coil (same atomizer head as Protank 3 and Aerotank)
  • Replaceable Atomizer Heads
  • Removable Mouth Piece (compatible with most 510 drip tips)
  • Ego Threaded
  • Dimensions: 3"L x 9/16"D

The Kanger T3'D is a bottom coil Clearomizer tank system by Kanger. It features replaceable atomizer heads and has a eLiquid capacity of about 2ml. 

Bottom coil cartomizers provide a nice warm vapor, with a superb clean flavor, and reduced wicking issues.

The Kanger T3'D is filled from the bottom. If the Kanger T3'D atomizer head fails unexpectedly and the tank is filled with eLiquid, the atomizer head (base) can be easily replaced without the need to drain the eLiquid in the tank first. 

To fill the Kanger T3'D unscrew the bottom atomizer head. Hold the tank upside down and fill with approx. 2ml of eLiquid. With the tank mouthpiece-end down, screw the atomizer head back on. 



Important Note:
This Clearomizer is designed to fasten onto the outer cone threads of an Ego battery. It is NOT 510 threaded.

This Clearomizer is compatible with Ego series batteries such as the Joye Ego-Tank, Joye Ego-C, Joye Ego-C Twist and Vision Spinner battery. 

To use with a 510 threaded MOD like the Zmax (seen in image below), iTaste SVD, Smoktech SID, Joye eVic etc... you will need a 510 to Ego Adapter. Even if your MOD has Ego threads, they may or may not be deep enough to make contact. We strongly suggest purchasing the adapter if you intend to use this Clearomizer with a MOD.




Tips:
  • The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.

 

  • When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.

 

  • Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.

 

  • The atomizer head of the Kanger T3'D can unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the Kanger T3'D.

 

  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.

 

  • When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.

 

  • Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one if available.
Package Contents:
  • 1 x Kanger T3'D
Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard/high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. 

For standard/high resistance atomizers or restrictive devices (ex. pod based/pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer/tank. Preference may vary depending on the user and frequency of use. 

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. 

Battery Safety Warning: 

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. 

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. 

Always charge in or on a fire-proof surface. Never leave charging batteries unattended. 

Do not modify batteries or chargers in any shape or form. 

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and/or fire. 

Store your batteries away from the sun and heat to prevent overheating your batteries. 

Please be sure to inspect your battery before use to ensure it is not damaged including tears / rips in the battery wrap. Discontinue use immediately if battery is damaged. 

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. 

Kanvape.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.



Related Items