Laisimo S3 200W TC
The Laisimo S3 200W TC Mod is a powerful and unique device that is designed for cloud chasing enthusiasts. The Laisimo S3 200W TC can fire up to 200 watts and supports Ni200(Nickel), Titanium, and Stainless Steel WIRE in temperature control mode.
The Laisimo S3 200W TC features a user friendly OLED screen which is conveniently placed on the top of the device. Now there is no need to constantly adjust your hand to see your settings with this display screen. You can also adjust the brightness in eight different settings by using the Contrast feature in the menu. You may also rotate the display screen by using the Rotating feature in the menu as well.
The Laisimo S3 200W TC requires (2) high amp 18650 batteries (Sold Separately) and can be easily replaced using the strong magnet battery cover. Please note, the Laisimo S3 200W TC requires an external charger to recharge your batteries.
Features and Specs:
- Dimensions: 4" x 2-1/4" x 1"
- 510 Threaded
- Spring-loaded Gold-Plated Brass Contact Pin
- Wattage Output: 5.0 - 200.00W
- Voltage Output: 0.5 - 7.5V
- Temperature Control : Ni200 / Titanium / Stainless Steel
- Temperature Control Range: 100 - 350C / 212 - 662F
- Resistance: 0.05ohm - 2.5 ohm (Kanthal, Ni200, Ti, SS)
- Battery Voltage Range: 6.2V - 8.4V
- User Friendly Top OLED Screen
- OLED Screen Rotation Feature
- Magnetized Battery Cover
- Requires (2) 18650 High Amp Batteries (sold separately)
- Requires an External Charger (sold separately)
- Low Voltage Protection
- High Voltage Protection
- Low Resistance Protection
- Short Circuit Protection
- Reverse Battery Protection
- Overheating Protection
Please note: Temperature control requires the use of NI200, titanium, or stainless steel coils.
LAISIMO & SIGELEI PRODUCTS MUST BE WARRANTIED FROM THE END USER. IF YOU HAVE A DEFECTIVE LAISIMO PRODUCT, FOLLOW THIS LINK TO RESOLVE THE ISSUE THROUGH THEIR USA DISTRIBUTION CENTER:
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.
KANVAPE.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.