KANGERTECH JUPPI SUB OHM STARTER KIT WITH CLEAROMIZER AND MOD

Quantities available for this product:

  • BLACK : 24
  • STAINLESS : 36
  • WHITE : 12
Description
 
Kangertech Juppi Starter Kit


The JUPPI KIT features the Juppi TC Box Mod and the Juppi Tank. The Juppi Box Mod fires up to 75 watts and requires (1) high amp 18650 battery (sold separately). The Kanger Juppi Box Mod supports Nickel, Titanium, Stainless Steel 316 and Ni-Chrome wire in temperature control mode. The Juppi Box Mod has a comfortable side fire button with a smooth stainless steel construction. Batteries are easily replaced with the magnetized battery cover and may be charged via the micro USB charging port.

The Kanger Juppi tank utilizes unique Juppi 0.2ohm atomizer heads which features a unique coil structure design. The coil structure design is very similar to the NotchCoil and is REWICKABLE as well with the included cotton. The coil design allows for a more efficient heating surface area for a smooth vaping experience. The Kanger Juppi Tank features a 3ml e-Liquid capacity glass tank with a convenient top fill design. The Kanger Juppi features dual symmetric airflow slots. It also features a cone drip tip design which allows for a cooler vaping experience and more vapor production.

Please note, due to the design of the device, the Juppi TC Box Mod is only compatible with 22mm tanks or smaller. 23mm and larger tanks are NOT compatible and will not fit the Juppi TC Box Mod. Certain 22mm tanks may not fit if a part of the tank juts out such as the airflow valve or top cap. If you are unsure if your tank fits, feel free to contact us and we will confirm if your tank is compatible or not.


Features and Specs for Juppi Box Mod:

  • Dimensions: 3-5/16" x 1-7/8" x 1" (Without Tank)
  • Spring-loaded 510 Contact Pin
  • Temperature Control : Nickel / Titanium / SS316L / Ni-Chrome
  • Temperature Control Range: 100 - 300C / 200 - 600F
  • Wattage Output: 7-75W
  • Resistance Range: 0.1 - 2.5ohm
  • Micro Charging USB Port (DC 5V/1000mAh)
  • Requires (1) High Amp 18650 Battery (Sold Separately)
  • OLED Display Screen
  • Magnetized Battery Cover for Easy Battery Access
  • Side Switch Button
  • Stainless Steel Construction
  • Short Circuit Protection
  • Low Battery Indicator
  • High Temperature Protection

Features and Specs for Juppi Tank:

  • Dimensions: 1-15/16" x 7/8" (Including Drip Tip and Threads)
  • 22mm Diameter
  • 510 Threaded
  • 3.0ml e-Liquid Capacity
  • Top Fill Design
  • Glass Tank
  • Symmetric Airflow Slots
  • Cone Drip Tip Design
  • Unique Kanthal Rewickable 0.2ohm Juppi Atomizer Head
  • Coil Design Allows for Efficient Heating Surface Area
  • Similiar to the NotchCoil Design Structure
  • Comes Preinstalled with Organic Cotton

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.

Warning: This tank uses a sub-ohm resistance atomizer. It will only work on a mechanical mod or a mod capable of firing an atomizer of 0.5ohm or lower. You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using a regulated mod, make sure it can handle the amps. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

This product will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.

KANVAPE.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

Package Contents:
  • 1 x Kanger Juppi Box Mod
    1 x Kanger Juppi Tank
    1 x Juppi 0.2ohm Atomizer Head
    1 x Set of Spare O-Rings
    1 x Micro USB Cable



Related Items