JOYETECH EGRIP 2 II CL FULL ALL IN ONE SUB OHM 80W MOD CLEAROMIZER STARTER KIT

Quantities available for this product:

  • STAINLESS : 10
  • BLACK : 6
  • RED : 6
  • WHITE : 0
  • GOLD : 7
eGrip II Kit
eGrip II Kit
eGrip II, a new version of eGrip, is more elegant and more handsome in appearance. It applies the new V4.03 firmware with RTC(Real Time Clock) display. TFTA-Tank technology and the dual battery protection system are built in one device. eGripII, with NotchCoilTM 0.25ohm DL head brings you better vaping experience. Large 0.96 inch OLED screen, clock screen protection and multiple tank light colors all make it more practical and attractive catering to your preference.
Also, upgradeable firmware always enables it up-to-date.
Standard Configuration:

1*eGrip II
1*NotchCoilTM 0.25ohm DL .
1*BF SS316-0.5ohm DL .
1*BF Clapton-1.5ohm MTL .
1*Mouthpiece
1*USB Cable
1*Manual
1*Warranty Card
1*Atomizer Adapter


eGrip II applies RTC(Real Time Clock) display
RTC--Real Time Clock enables eGrip II to present you time in two kinds of method.
A. In general interface, it presents both Dial Display and Numerical Display.
B. In screen protection, it shows you real time in Dial Display.
eGrip II is newly added with game mode.
eGrip II is newly added with game mode.
The game will bring you entertainment and leisure at free time.
eGrip II Kit
Dual Circuit Protection
eGrip II applies two sets of battery protection circuit system, realizing overall battery protection of over-charging,
over-current and over-discharging, which makes it more safe and reliable.
eGrip II Kit
eGrip II applies NotchCoilTM 0.25ohm DL. Head
The new NotchCoilTM 0.25ohm DL. (Direct Lung) head lasts longer and can be used under high wattage condition.
It will surely bring you great vaping experience ever.
eGrip II Kit
NOTE: 1.Please do not wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.
NOTE:2.Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off  
NOTE:3.condition (with airflow widely open) before its first use to avoid dry burn.                                
TFTA-Tank of All-in-One device
TFTA-Tank technology, which means Top Filling and Top Airflow, enables the top section and coil to be removed
and as one solid unit, presenting you eGrip II of All-in-One style with evolve and improvement.
Coil replacement and juice fill can be achieved by removing this top section from the cup.
eGrip II Kit
Fashionable Tank Lights
Multiple colors of tank lights make eGrip II more attractive and fashionable catering to your preference.
eGrip II Kit
Apply the Atomizer AdapterUnscrew the mouthpiece base, and screw the atomizer adapter tightly with a tool (coin),
then you can apply other types of atomizer with eGrip II
eGrip II Kit
Firmware Upgradeable
eGrip II comes with the upgradeable firmware.
Having Version 4.03 for eGrip II, new interface, multiple modes and functions, game mode are available.
eGrip II Kit
Adjustment of Air Inflow
Rotating the ring on the atomizer cap clockwise or counterclockwise to adjust the air inflow.
The air inflow will be the largest when both signs match with each other. Rotate it 90 degrees to the left or right will reach to the minimum air inflow.
eGrip II Kit
Multiple Atomizer Heads Can Be Applied
NotchCoilTM 0.25ohm DL . head, BF SS316 Series Heads, BF Clapton-1.5ohm head, BF Ni, BF Ti and BF RBA head.
eGrip II Kit
Multiple BF Series Heads for Your Choice
eGrip II Kit
How to Reset The Device
eGrip II Kit
Charging & Upgrading
The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device. Simply charge eGrip II by connecting it with
the wall adapter or a computer via USB cable. The battery is charged as shown in the picture. When it is fully charged, the charging bar will disappear.
eGrip II Kit



Related Items